Unsolved
This post is more than 5 years old
1 Message
0
1809
May 4th, 2016 05:00
Latitude E7470 Windows 10 64 bit installation with runs in a IP Address issue
Hello,
I try to install Windows 10 64bit via PXE and WDS on a brand new E7470. Befor I get the selection box where I can select the OS image, I get an Error box.
"WdsClient: An error occured while obtaining an IP address from the DHCP. and so on ..."
Our WDS is on a Windows Server 2012 Standard installed.
I guess it's a driver issue, but I don't where I can put the in the right driver.
I hope somebody have a good idea to fix the issue. I get a lot of new Latitude in the next couple of days.
Cheers,
Barracuda
No Events found!
CAMFIL
1 Message
0
June 9th, 2016 01:00
Hi Barracuda,
I'm using a Windows Server 2008 r2 with WDS and I have the same issue... Do you have found any solution ?
Thanks in advance !
Rémi.
France
nil11anjan
2 Posts
0
August 2nd, 2016 21:00
I am facing same issue with boot image through 2008 wds server and windows 10 64bit.
pls re[ly.
Vikes23
2 Posts
0
August 9th, 2016 15:00
Did you figure out the solution/ right driver
halo7
1 Message
0
August 15th, 2016 15:00
We remedied the issue at my work by building a FRESH 10.0.14393.0 PXE boot image off the 1607 ISO using a 1607-native environment to avoid driver signing issues.
HTH