DCIP 2.0 driver import issue

Question

So this issue looks familiar. Basically I can run the import driver wizard for the 6420 xp driver pack and I end up with the storage drivers coming in just fine and no drivers under the system cab drivers section. I got this error (as did many others) with the previous version. So I removed those driver packages and just imported the drivers (didn't do the separate storage driver part) since that was a fix for the previous version...and again, no joy. Tips? I don't get any errors on the import. Also, the driver files are in the proper folder locations, just not in the SCCM console.

DELL-Warren B · Answer

Others have had this issue and addressed it by applying the latest ConfigMgr patches from Microsoft. I don't have the KB article handy, but there is one patch that addresses issues with importing drivers.

ColfaxIT · Answer

Alright I'll try patching and see what happens.

ColfaxIT · Answer

I can confirm that after running all patches/rebooting that this still does not work for me. I already had SCCM fully patched and just went ahead with server updates. Any idea what that KB was?

DELL-Warren B · Answer

KB2213600 is the other with KB2513499 addressing an issue with Categories that shows up with KB2213600. http://support.microsoft.com/kb/2213600 http://support.microsoft.com/kb/2513499

DELL-Warren B · Answer

KB978754 is one of the patches that has helped with driver imports. I believe there is another, still digging. http://support.microsoft.com/?kbid=978754

ColfaxIT · Answer

I can confirm that KB978754 does not fix the issue for me. The other 2 will not load.

gbadenes · Answer

I have the same problem here. I doubt it is a problem with ConfigMgr, since I can import the drivers manually without any problem.

derochema · Answer

I'm having this issue as well. Config mgr 2007 version 4.00.6487.2000 with R2 installed. I have downloaded the latest dcip 2.0 and I'm using the latest version of the cab file for an Optiplex 990. I run the wizard with no error, but find no drivers listed under the 990-Windows7-x86-A02 package.

Has anyone found a solution?

Can I just go ahead and import the drivers from the source directory and then link them to this empty package?

derochema · Answer

Followup to this issue is I've tried importing the cab file for a Dell Latitude E6220 with no luck. I have also tried downgrading DCIP 2.0 to version 1.2 and still no drivers in the package. I have monitored site status for any error during the import and everything goes fine. I would think there would be an error if there is some sort of permission issue.

I have also tried restarting the server after installing DCIP 2.0.

I'm at a loss to where the issue is. I'm thinking there is something wrong with DCIP in general.

Enterprise Client

DCIP 2.0 driver import issue

Was this post helpful?