R520 - Losing Raid Configuration After Random Power failure.

The Server randomly powers itself off, and when power is restored, the bios says there are not virtual disks.

You can go into the Raid Controller and import the Raid Config from the hard drives and it be okay, until next random power failure.

Using Raid-0 and the Raid Controller is the PERC H710.

The server is on an UPS and the main supply is okay, you can also power the server off/on with no issues.

The other thing is that the lifecycle controller said it had an update and it needed to be re-enabled.

I left the dell running a self test, and it came up with an error at 89%. Error Code 2000-0251 and validation code 90366.

Is this server repairable will it be the raid controller, as it this something deeper and better getting a new one?