Unsolved
This post is more than 5 years old
2 Posts
0
291
August 17th, 2016 05:00
PowerEdge 1600SC Hard Drives in failed state after PSU replacement
We have a PowerEdge 1600SC that suffered a power outage (failed PSU). On replacement of the PSU there is a configuration mismatch error. We have entered the Configuration utility using ctrl+m and entered the configure > view/add to pull the config from the drives / nv memory but no option is available. I have checked the status of the drives and they state fail. We have 6 drives 2 in RAID 1 and 4 in RAID 5.
Thank you
No Events found!
PEOOWretired
2 Intern
•
207 Posts
0
August 17th, 2016 11:00
Dear Customer
Thank you for contacting the dedicated Out of Warranty forum for PowerEdge products. We have sent you a private message on the forum in order to get the Service Tag of your PowerEdge Server.
Kind Regards,
Rakesh Kumar
mehodge
2 Posts
0
August 18th, 2016 02:00
Hi Rakesh,
Thank you for your response. The Asset tag no. is 3******