Unsolved
This post is more than 5 years old
3 Posts
0
541
January 11th, 2007 07:00
DiskXtender on a MSCS cluster
Hi all,
I try to install DiskXtender on a Mscs cluster. We are in a active - active configuration. After installation of DiskXtender , we have seen that the user "clumstr" has a problem : the rights "Act as part of the operation system and Logon as a service" of this user were gone !. So, if you restart the cluster, it will fail.
Does anybody has the same problem ? Does anybody use DiskXtender in a cluster config ? In a cluster active - active config ?
Thanks a lot for your help.
Regards.
Pierre.
I try to install DiskXtender on a Mscs cluster. We are in a active - active configuration. After installation of DiskXtender , we have seen that the user "clumstr" has a problem : the rights "Act as part of the operation system and Logon as a service" of this user were gone !. So, if you restart the cluster, it will fail.
Does anybody has the same problem ? Does anybody use DiskXtender in a cluster config ? In a cluster active - active config ?
Thanks a lot for your help.
Regards.
Pierre.
No Events found!
fschlupp
397 Posts
0
January 11th, 2007 15:00
◆ One active/one passive
◆ Two active/one passive
◆ Three active/one passive
◆ Two active/two passive
◆ Two, three, or four active
Check out the best practices guide for more info:
http://powerlink.emc.com:80/km/live1/en_US/Offering_Technical/Technical_Documentation/300-004-193_a02_elccnt_0.pdf
bmeltzer
26 Posts
0
January 29th, 2007 13:00
Dx would not have removed any permissions for a user. Is DX installed to the Default Cluster Group or to its own Virutal Server as recommended?
What is the account the DX is using as the service account?
Have you checked the Windows Event logs?
Have you checked the cluster logs located at C:\winnt or windows\cluster\cluster.log?