Unsolved
This post is more than 5 years old
397 Posts
0
659
July 24th, 2007 05:00
DiskXtender 6.1 and CentraStar Version
Hello,
The DX 6.2 Release Notes state CentraStar version 3.0.2-1204-70213053 or later is required with DX 6.2.
I see no mention of CentraStar in the DX 6.1 Release Notes.
I have a customer who intends to run DX 6.1 and currently runs CentraStar version 3.0.1.
Is CentraStar version 3.0.1 supported with DX 6.1?
The DX 6.2 Release Notes state CentraStar version 3.0.2-1204-70213053 or later is required with DX 6.2.
I see no mention of CentraStar in the DX 6.1 Release Notes.
I have a customer who intends to run DX 6.1 and currently runs CentraStar version 3.0.1.
Is CentraStar version 3.0.1 supported with DX 6.1?
No Events found!
Bojan2
15 Posts
0
July 26th, 2007 07:00
I have a customer that has centrastar 3.0.1 and runs Dx6.1.
Look at the EMC Information Protection guide and you will find that DX 6.1 supports Centera SDK 3.0 and all the CentraStar connecting versions - all you need next is to find what CentraStar versions Centera SDK 3.0 supports.
Best regards
Bojan
fschlupp
397 Posts
0
July 27th, 2007 08:00
DiskXtender 6.2 uses version 3.1.544.0 of the Centera SDK. DiskXtender 6.1 uses version 3.0.414.0.
Bojan2
15 Posts
0
August 10th, 2007 03:00
Do you know where I could find some document with supported Centra Star version for DiskXtender 6.1 and 6.2?
I have heard a lot of thing about supported versions but I can not find any documentation regarding it.
Best regards,
Bojan
fschlupp
397 Posts
0
August 10th, 2007 09:00
I found a table on page 56 of the DX FSM Admin Guide (DXW_FSM_6.2_AG.pdf)
You can download the guides and the software at ftp.emc.com/pub/documentum_soft/level/Software/DxWindows/6.20.060
I think there's a similar table listing CentraStar support for DX 6.1
Hope this helps