Unsolved
This post is more than 5 years old
1 Message
0
7237
September 23rd, 2004 18:00
Dimension 4300 A06 flash/Bios
I downloaded BR61806.exe using the instructions from the Dell website. My current Bios version is A-02. After the file icon appeared on my desktop and I inserted a formatted 3 1/2 floppy and it copied. I restarted my pc and left the floppy in the drive and it did not flash the bios. Should I delete what I have and download again to repeat the process or did I miss something? Thanks, Geri
No Events found!
volcano11
2 Intern
•
28K Posts
0
September 23rd, 2004 18:00
It should have booted to DOS and prompted you to flash the BIOS. If you floppy drive is not set as the first boot device in the boot sequence, it will not boot from the floppy drive. To get into the BIOS you either press the F2 key immediately after the computer is started, and go to Boot Sequence to change the boot order.
http://support.dell.com/support/edocs/systems/dim4300/syssetup.htm#1097056
Steve
Message Edited by volcano11 on 09-23-2004 02:38 PM