Unsolved
This post is more than 5 years old
2 Posts
0
887
April 4th, 2018 05:00
Volume Replication is showing down while the sites are up
Replication between a Dell SC030 running 5.6.3 to a SC8000 running 6.5.2 using EM 2014 is showing the replication state to be down, none of the replication volumes are replicating.
The WAN link is up. The volumes on both controllers are showing to be up. The iSCSI controllers are up. The remote system is showing as connected. Remote Volumes are showing as up. We are not replicating Replays and not using Deduplication.
I have tried pausing the replication for a couple of minutes and then starting it.
This is not a new configuration, it has been running for a while.
Thank you for your help,
Bobby
No Events found!
DELL-Sam L
Moderator
•
7.6K Posts
0
April 4th, 2018 13:00
Hello Bobby,
I am going to send you an email and if you can reply with your controller serial# for both your SC030 & SC8000 that would be great. Also, if I can get you to do a phone home on both systems so I can look at the current logs that would help as well.
Please let us know if you have any other questions.