Your drive is showing as failed and hotspare is engaged. You will need to replace the failed drive. Once the drive is replaced the copy from hotspare to drive should start. Once the copy back is complete you should see that hotspare drive will go to standby/ not in use.
talhaiqbal
6 Posts
0
September 19th, 2020 10:00
PowerVault MD3620i
DELL-Sam L
Moderator
•
7.6K Posts
0
September 21st, 2020 10:00
Hello talhaiqbal,
Your drive is showing as failed and hotspare is engaged. You will need to replace the failed drive. Once the drive is replaced the copy from hotspare to drive should start. Once the copy back is complete you should see that hotspare drive will go to standby/ not in use.
talhaiqbal
6 Posts
0
September 23rd, 2020 09:00
Thank you Sam
I already replaced the drive. It shows 2 hot spare in standby and 1 in use
DELL-Sam L
Moderator
•
7.6K Posts
0
September 23rd, 2020 11:00
Hello talhaiqbal,
Are there any other drives showing as failed? Has the copy back finished?
talhaiqbal
6 Posts
0
September 23rd, 2020 12:00
It looks like its done, shows optimal
DELL-Sam L
Moderator
•
7.6K Posts
0
September 23rd, 2020 13:00
Hello talhaiqbal,
Can I get you to pull a support bundle so that I can review it? I will send you a private message so that you can send me the log.