Trying to connect an EMC AX4 to a Brocade FCX648.

Greetings,

I have a M1000e Chassis with two m6220 (not stacked). 

The AX4-5i is connected to ports g17 and g18 on each m6220.

From the blade I can see all 4 AX4 ip addresses and everything works fine.

Everything connected and working.

I need to connect that AX4 to the brocade FCX648.

When I connect the AX4 to the brocade I cannot reach it from the server.

I treid doing vlans for each m6220 but that didn't work.

I was hoping someone here could give me a tip.

Thank you very much for your time!

Ed