Unsolved
This post is more than 5 years old
1 Message
1
1480
August 28th, 2019 02:00
SAN Dell Equalogic PS6500 - Warnings
Hi Team,
We are getting the below warnings on SAN Dell Equalogic PS6500. Any help to rectify the warnings will be appreciated.
Warning: Member 35PS6500-01 Unauthorized Drive Detected
Warning: Member 35PS6500-01 The member contains a drive not approved for use in a PS Series array. Replace all unauthorized drives with drives approved for PS Series arrays.
Warning: Member 35PS6500-01 network port eth1 has a requested status of up, but the current status is down.
Warning: Member 35PS6500-01 network port eth1 has a requested status of up, but the current status is down.
Warning: Member 35PS6500-01 network port eth2 has a requested status of up, but the current status is down.
Warning: Member 35PS6500-01 network port eth2 has a requested status of up, but the current status is down.
Warning: Member 35PS6500-01 network port eth3 has a requested status of up, but the current status is down.
Warning: Member 35PS6500-01 network port eth3 has a requested status of up, but the current status is down.
Cambridgeport90
1 Rookie
•
54 Posts
0
October 29th, 2019 12:00
While never having experience with these particular devices myself, I would make an educated guess that they can only take a few different drive tyoes; some other Dell equipment is like that, as well. Drives is just one place where I have seen this sort of thing occur. What kind of drives are you using, and are you able to get around the warning and keep going?
DELL-Sam L
Moderator
•
7.6K Posts
0
October 30th, 2019 09:00
Hello Bharu,
As Cambridgeport90 stated the error that you are getting is that you have inserted a non equallogic drive into your PS6500. If it is a Dell drive that you inserted, then we can look at the dell part# to ensure that it is a equallogic supported hard drive.
Please let us know if you have any other questions.