Unsolved
This post is more than 5 years old
1 Message
0
897
November 4th, 2016 11:00
Reconnecting drives in a MD3000
So my setup is as follows:
Dell R710 connected to a Dell MD 3000 which is backing up to a Dell MD 1000.
Server was fulfilling DC, DHCP, AD, DNS, PS.
Server failed and had to be reformatted. Server 2008 R2 Stnd installed and reconnected everything. I installed Dell MSM and I can see the disk groups and the virtual disks but cannot figure out how to access the data.
There is a windows bare metal restore on the enclosure that I am trying to access to restore the R710.
No Events found!
DELL-Sam L
Moderator
•
7.6K Posts
0
November 9th, 2016 11:00
Hello mclaughlin.scott,
What you need to do is to setup the host mappings again. Here is a link to the admin guide and if you look on page44 it explains how to do your host mappings. http://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_powervault/powervault-md3000_user's%20guide20_en-us.pdf
Please let us know if you have any other questions.