Unsolved
This post is more than 5 years old
6 Posts
0
3966
October 4th, 2011 03:00
RAID1 limitations using two 3TB drives?
Have a 435T/9000 with currently 0.5 + 1TB HDD. Want to two 3TB Hitachi drives with RAID1. Installed everything and upon bootup the two drives only showed 750GB using RAID1, but I was hoping for 3TB!!! Not sure why I was limited to 750GB? Has anybody any clue why I was limited to 750GB. Spoke to Dell and they said they can RAID 2TB. Does this mean my 3T is not supported by the firmware? Any suggestions would be most appreciated.
No Events found!
Dev Mgr
4 Operator
•
9.3K Posts
0
October 4th, 2011 08:00
You posted in the Dell|EMC Storage section.
Which Dell EMC SAN do you have? I don't think any of the Dell models support 3TB drives, even with the latest flare code.
If you have a desktop or laptop, I would suggest to post in the desktop or laptop section.