Unsolved
This post is more than 5 years old
2 Posts
0
4342
March 5th, 2019 15:00
PowerVault MD3200 and MD1200 SAS Setup
Have 2 PowerEdge R710s suppose to be connected to a PowerVault MD3200 and 2 MD1200s. I can only get the servers to reconize the MD3200. The server were moved to a new location without proper documentation on how the were originally setup. Looking for help on how to connect the Fibre channels together to get access to the MD1200s?
No Events found!
DELL-Sam L
Moderator
•
7.6K Posts
0
March 6th, 2019 06:00
Hello ThornManz,
Here is a link to our deployment guide for your MD3200, if you look on page 23 is shows you how you want to cable your MD1200 to your MD3200. https://downloads.dell.com/manuals/common/powervault-md3200i_deployment%20guide_en-us.pdf
Please let us know if you have any other questions.
ThornManz
2 Posts
0
March 8th, 2019 13:00
So it did not have any wiring setup instructions. do you have access to any of that?
DELL-Sam L
Moderator
•
7.6K Posts
0
March 11th, 2019 08:00
Hello ThornManz,
I don’t have any access to how your system was setup. You can use the deployment guide from the link that I posted in my previous post to connect your MD3200 & MD1200 to each other.
Please let us know if you have any other questions.