Unsolved
This post is more than 5 years old
1 Message
0
17776
September 16th, 2011 13:00
POWERVAULT - 124T - NEED HELP SETTING IP ADDRESS
We are trying to reset the IP address on the PowerVault 124T.
Have followed the User Manual - using the up/down/enter keys on the fron instrument keypad.
The issue is that we are not able to enter a blank in the digits for the ip address; i.e. 192.168.2.35
The only digits that we can select are 0 - 9 ... no blank ... so we have to end up with 192.168.002.035 ....
Any advice would be greatly appreciated
Thank you.
No Events found!