MD3220i - Missing MAC Address on Management Port

Hi All

just wondering is there a way to set the MAC address to the management port as when the system starts up i get error stating ethernet mac address not set.

This happened after i performed a sysWipe

Instantiating /ram as rawFs, device = 0x1
Formatting /ram for DOSFS
Instantiating /ram as rawFs, device = 0x1
Formatting...Retrieved old volume params with %38 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 0
0 FAT copies, 0 clusters, 0 sectors per FAT
Sectors reserved 0, hidden 0, FAT sectors 0
Root dir entries 0, sysId (null) , serial number 10000
Label:" " ...
Disk with 1024 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT12, sectors per cluster 1
2 FAT copies, 1010 clusters, 3 sectors per FAT
Sectors reserved 1, hidden 0, FAT sectors 6
Root dir entries 112, sysId VXDOS12 , serial number 10000
Label:" " ...
Instantiating /ram as rawFs, device = 0x1
OK.

RTC Error: Real-time clock device is not working

Adding 13884 symbols for standalone.
ERROR: World Wide Name not initialized. Network functions disabled.
Length: 0x13c Bytes
Version ver03.0A

System startup messages:
========================
ERROR 85.01: Ethernet MAC address is not set