Unsolved
This post is more than 5 years old
1 Rookie
•
3 Posts
0
21407
November 30th, 2013 07:00
MD3200i
how to reset the device to factory settings via com port?
No Events found!
Unsolved
This post is more than 5 years old
1 Rookie
•
3 Posts
0
21407
November 30th, 2013 07:00
how to reset the device to factory settings via com port?
Top
alexlord
1 Rookie
•
3 Posts
0
December 2nd, 2013 02:00
please help me tshoot this problem =(
alexlord
1 Rookie
•
3 Posts
0
December 2nd, 2013 02:00
any ideas? i got error 434 and message "raid controller in recovery mode"
Dev Mgr
4 Operator
•
9.3K Posts
0
December 2nd, 2013 07:00
Other than resetting the password via serial, I think it's proprietary information on how to use the serial port for other things and this is probably not allowed on these boards.
You first said you wanted to reset the unit to factory, but then you mentioned you have an issue. If your raid controller is in recovery mode, have you called PowerVault support to open a case to have them work with you to fix this?
Norbert Tretkow
2 Posts
0
December 3rd, 2013 01:00
I'm not sure if this still works with an MD3200i:
lists.us.dell.com/.../038389.html