LACP configuration for management Powerscale A300 management

We currently have a four-node EMC PowerScale A300 cluster connecting to our Cisco 9504 switch. For the 25Gbps aggregated connections we have LACP set on both the appliance and network so no issues there but the previous team that configured management only has one of the four connections to a access switch connected and LACP set on the EMC.

Reading the EMC PowerScale network configuration is not clear how we should treat these four connections. Should they be in one port channel group (lets call it channel 10). 

Here is example of what we would configure (I feel it should be a a port channel with a single connection per node but what would be the purpose of that).

channel-group 10 mode active