This post is more than 5 years old
13 Posts
0
12487
February 24th, 2015 16:00
HELP ME OUT PLEASE !!!!!
I am bulding a cluster from 2 nodes 2008 R2, and I have configured my new SAN MD3400, added the disks to hosts, when I run the cluster validation i got failure on test (validate scsi-3 persistent reservation Reserve)
Please help me out because dell US don't want to support my region which has no dell support.....!!!
Thanks in advance
No Events found!
DELL-Sam L
Moderator
•
7.6K Posts
0
February 26th, 2015 09:00
Hello Mhmood Hamooda,
To remove the persistent reservation Reserve you will need to run the following command from SMCLI:
Clear virtualDiskName1 reservations
The virtual disk name1 is the name that you gave that virtual disk in MDSM. You can run the same command on all virtual disk by changing the name to allVirtualDisks. Here is also a link to SMCLI as well just in case you don’t have it already. http://downloads.dell.com/Manuals/Common/powervault-md3400_Reference%20Guide9_en-us.pdf
Please let us know if you have any other questions.