Unsolved
This post is more than 5 years old
1 Message
0
21490
August 12th, 2014 04:00
Fibre channel link errors continued after passing threshold
In our Dell Powervault 1220 appeared following error in the event viewer. Please help me to resolve this error.
Date/Time: 8/12/14 3:12:21 PM
Sequence number: 3561822
Event type: 1206
Description: Fibre channel link errors continued after passing threshold
Event specific codes: 0/0/0
Event category: Error
Component type: Channel
Component location: Host-side: RAID controller module in slot 0, port 4
Logged by: RAID Controller Module in slot 0
Raw data:
4d 45 4c 48 03 00 00 00 5e 59 36 00 00 00 00 00
06 12 16 10 85 e8 e9 53 00 00 00 00 15 00 00 00
04 10 00 00 01 00 00 00 06 00 00 00 06 00 00 00
00 00 00 00 04 00 00 00 01 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01 00 00 00 00 00 00 00 00 00 00 00
DELL-Sam L
Moderator
•
7.6K Posts
0
August 19th, 2014 11:00
Hello eyyyyy,
That error is referring to a loss in communication to one of the internal ports on the EMM. What I would do is to check in OMSA & make sure that there are on other errors listed for your MD1220. If there are any alerts & any messages pointing to your EMM then what would need to be done is to get a Dset report so we can look at the logs & see what the MD1220 is showing as not optimal.
Please let us know if you have any other questions.