Unsolved
This post is more than 5 years old
1 Rookie
•
17 Posts
0
9462
September 27th, 2010 02:00
Error code: 800070001@02070008 with MD3000i
When trying to initialise a iscsi virtual disk, on my windows 2008r2 server I receive the following error
incorrect function then click ok and the drive just stays there uninitialised.
In the even log it tells me that the VDS fails to write boot code on a disk during clean operation
Error code: 800070001@02070008
No Events found!
Dev Mgr
4 Operator
•
9.3K Posts
0
September 27th, 2010 08:00
Did you install the host part of MDSM (or the typical option (includes the host part)) and connect the server to both raid controllers (via the iSCSI logins)?
It's possible that the virtual disk is assigned to controller 1 and your server may only be connecting to controller 0.
dwelldon
1 Rookie
•
17 Posts
0
September 27th, 2010 08:00
I haven't installed the host part, I have just used the MS iscsi initiator
Dev Mgr
4 Operator
•
9.3K Posts
0
September 27th, 2010 13:00
I'd suggest you read the online documentation and follow the instructions. This will probably solve your problems.