Unsolved
This post is more than 5 years old
2 Intern
•
129 Posts
0
2718
February 27th, 2019 07:00
Equallogic ps5500 - rename volume and reflect it in iSCSI
Hi everyone,
simple: vol ren old_vol new_vol
does not change target name, unless I have maybe reboot/restart the storage?
Is it possible to change vol name so that change will be reflected in iscsi names?
many thanks, L.
No Events found!
dwilliam62
4 Operator
•
1.5K Posts
0
June 24th, 2019 14:00
Hello,
No. That is per the iSCSI 3270 spec. You have to insure that two volumes can never have the same name.
All your are renaming is the iSCSI alias.
FYI: There is a specific Equallogic Dell PS Series SAN here on the Dell Community Forum.
Regards,
Don