Unsolved
This post is more than 5 years old
1 Rookie
•
41 Posts
0
24244
October 14th, 2013 03:00
Discovering EMC VNX5300 in OpenManage Essentials
Hi,
I added EMC VNX5300 block storage to OpenManage Essentials 1.2.1, but there doesnt seem to be much inventory collected and also SNMP traps sent from storage box to OpenManage don't appear in OpenManage.
EMC VNX5300 firmware 5.32.000.5.206; SNMP is configured; latest Navisphere CLI 7.33.0.0.15 is installed on OpenManage server.
I can run both the SNMP and Dell|EMC tests successfully from Dell Troubleshooting tool.
Did I miss anything? Thanks,
Egils
No Events found!