Unsolved
This post is more than 5 years old
5 Posts
0
17848
April 21st, 2015 06:00
Dell PowerVault ML6000 Firmware Update, version A30
Hi,
Just applied Dell PowerVault ML6000 Firmware Update, version A30 to our ml6010. After an hour now have a none responsive library. Remote hands have powered cycled. Nothing. Have reseated LCB and remove CF and booted with/ out LCB and CF still blank. Any ideas?
No Events found!
DELL-Sam L
Moderator
•
7.6K Posts
0
April 21st, 2015 11:00
Hello 3rd_level,
What was the version of firmware that was running on the ML prior to the upgrade? Also were there any errors on the system prior to the upgrade? If you look at the LCB what do the lights look like on the system? Also have your tried to boot the ML without having the cam bus terminator connected to see if there is any change or not?
Please let us know if you have any other questions.
3rd_level
5 Posts
0
April 22nd, 2015 03:00
HI Sam L,
Prior firmware: 641G.GS103,A29
No errors prior to upgrade
All 3 LED's on LCB are illuminated
Will get remote hands to remove cambus terminator