Unsolved
This post is more than 5 years old
4 Posts
0
5520
December 2nd, 2009 15:00
Dell CERC 6 2610SA - Does it support drives larger than 1TB?
I have a 2610SA SATA controller but it's not allowing me to initialize a 1.5TB Seagate. If I go to SATA Utilities it shows up but if I attempt to initialize, it doesn't show up in the list of available drives. I installed the 1.5Gbps jumper thinking that was the problem but still the same problem. I do have 4 other driver working on the controller but the largest is 1TB.
No Events found!
Dev Mgr
4 Operator
•
9.3K Posts
0
December 2nd, 2009 21:00
You may want to ask this in the HDD/SCSI/RAID section instead of the EMC section for more visibility, but I don't believe that the Dell CERC series will accept drives over 1TB.
HiDefX
4 Posts
0
December 2nd, 2009 21:00
Thanks... didn't realize there was a RAID forum... I'll post over there. This post can be deleted by the mod.