Unsolved
This post is more than 5 years old
3 Posts
0
1282
July 23rd, 2018 06:00
Connect between two storage U444 AND X925H
Hey, these are old storage arrays I had and I want to use them,
1. In what configuration should the cables be connected back
2. How do I connect with the Unity Connetion Utility using a cable?
3. Thank you very much!
The first storage is EMC 100-562-113 AX 4-5 LLC MODULE U444D
The 2nd storage is EMC 100-562-716 AX 4-5 storage processor X925H
No Events found!
DELL-Sam L
Moderator
•
7.6K Posts
0
July 23rd, 2018 09:00
Hello BenMamuka,
Looking at your pictures you have an AX4-5 and an expansion enclosure. What you will need to do is to connect the top enclosure to the bottom enclosure. You will need the expansion cables that came with the system. Once that is done then you will need to connect each controller on the Processor enclosure to your switch using the FC cables. You will need the serial cable that came with the unit if you don’t know the IP address of the controllers so that you can access them. You will also need java so that you can log in to Navisphere or Usphere.
Please let us know if you have any other questions.