Unsolved
This post is more than 5 years old
2 Posts
0
15356
September 12th, 2008 20:00
Change IP Address on AX150
Hi everybody, i dont have much experience with this kind of storage system, i want to folow this link to change the ip address
https://powerlink.emc.com/nsepn/webapps/btg548664833igtcuup4826/public/ax150/es_AR/faqs/AX_FAQs.htm
is in spanish
In resume i need to shutdown the system then wait a minute, then i need to push for 4 to 8 seconds the on/off button, then execute the initialization utility navisphere etc... the question is i will lost my information??
Regards
No Events found!
R. Barocio
2 Posts
0
September 12th, 2008 20:00
Dev Mgr
4 Operator
•
9.3K Posts
0
September 12th, 2008 21:00
The procedure would be:
- shut down all servers that use storage on your SAN
- press and release the powerbutton on the AX
- wait for the AX to power itself down
- press and hold the powerbutton for 4-8 seconds
- let the system completely boot up (wait for the fault leds to finish blinking and be off)
- use the initialization tool to discover the array and set new IP addresses