Pro Max Tower T2 FCT2250, installing WLAN card?

I couldn't find instructions for installing the internal antenna. Help me plz

@KhanhTuong​ 

Please can you confirm the Make Model and OS, along with any configuration details like touch screen, backlit keyboard, SFF or tower etc etc.

@anne_droid​ 

dell pro max t2. Fct2250 😁

I'm looking for internal antennas and card reader codes to find equipment to upgrade my device.

Hi

https://www.dell.com/support/manuals/en-us/dell-pro-max-fct2250-desktop/dell-pro-max-tower-fct2250-owners-manual/wireless-module?guid=guid-17e9c29d-abc5-44bd-95ce-79e58b869635&lang=en-us

If absent (common in base models without WLAN), external antenna kits aren't standard; users report sourcing compatible Dell pigtails or aftermarket options via forums.

Hi

Hope this helps................

• Attach the two antenna cables: the white (main) cable to the connector marked with a white triangle, and the black (auxiliary) cable to the black triangle connector on the card. These cables are pre-routed inside the chassis, often clipped near the rear panel or PCIe slots.​​

Antenna Cables Location

The antenna cables originate from small I/O ports or mounts on the rear of the chassis (visible externally as antenna connectors) and route internally to the M.2 slot area. They may be secured with clips along the side panel or near the system board; gently unplug them from any existing card before installation. Replace the side cover, reconnect power, and install drivers via Dell SupportAssist or the card manufacturer's site.

https://www.dell.com/support/manuals/en-us/dell-pro-max-fct2250-desktop/dell-pro-max-tower-fct2250-owners-manual/installing-the-wireless-card?guid=guid-11cf2c98-ceba-48a5-bf3c-63abc78bc4f1&lang=en-us

Unless they are missing.

@anne_droid​ 

• These cables are pre-routed inside the chassis, often clipped near the rear panel or PCIe slots.​​

Antenna Cables Location

The antenna cables originate from small I/O ports or mounts on the rear of the chassis (visible externally as antenna connectors) and route internally to the M.2 slot area. They may be secured with clips along the side panel or near the system board; gently unplug them from any existing card before installation. 

I'll have another look, even though I haven't seen any external antenna connectors either.

Unless they are missing.

:-) This is what I fear. 

@Lemminger​ In addition to those great suggestions, if the connectors are not there an alternative could be something like this or this at Amazon.

@JOcean​ 

Thanks for the tip. I'll see if I can get something like that from some other seller so that my expenses for the card were not spent uselessly.

@anne_droid 

It really looks as if there are no cables installed when the computer comes without WLAN and Bluetooth. Too sad.

@Lemminger​ Hope that helps out..there are alternatives.