Unsolved
This post is more than 5 years old
2 Intern
•
743 Posts
0
2014
March 24th, 2017 03:00
OME to script settings for DRACs
Hi,
I wonder if some of the scripting gurus present might be able to point me in the right direction?
What is the procedure to get OME to do the following changes on a fleet of DRACs:
On the Alerts Page/SNMP Traps and Email Settings for example, on an R820, there are some fields:
Alert Destination1/ State/ Destination Address
SNMP Trap Format
Email Alert 1, Email Alert 2
SMTP server address
So in OME if I make up a group of R820s that I want to target and then insert static entries for the above fields, what are the RACADM parameters needed to get the above fields populated via OME?
I just can't find the latest documentation that tells me the syntax for changing the above fields.
Thx very much for your help,
John Bradshaw
DELL-Martijn G
291 Posts
0
March 24th, 2017 05:00
Hi John,
There is a whitepaper available that shows how you can set most of those settings through OME.
Using OME to configure remote iDRAC's with the correct SNMP alert settings (Script)
It does not contain the email settings but that should not be very hard to add to the script, all the CLI commands are listed in this user guide iDRAC 8/7 v2.40.40.40 RACADM CLI Guide.