Unsolved
This post is more than 5 years old
1 Message
0
1801
June 14th, 2017 23:00
OME 2.2 manage Dell switch S4048
Sir,
I have a question about OME 2.2 and switch S4048. When S4048 happen interface down, S4048 sent trap to OME that cannot show correct interface down as below green mark of picture.
I try use MIBBrower tool to get trap from S4048. I can see info as below.
red mark is right info and OME should post it.
How can I fix it?
thanks
No Events found!
DELL-Shivendra K
2 Intern
•
685 Posts
0
June 15th, 2017 09:00
Hi, thanks for the query.
First of all, the trap mentioned here is a standard trap and is applicable to many network devices (switches, servers, etc). Your requirement seems very specific to S series switch. Warning: If you make the changes that follows, it will reflect for all traps being received from various devices and might not make sense for them. Editing trap (data and severity) for a set of specific devices is not possible in OME.
1. Navigate to Manage -> Alerts
2. Select "Network" under "Alert Categories & Definitions" menu item on left navigation pane.
3. Search for "linkdown" on right side pane.
4. For trap named "linkDown", edit the Format String. Assign "LinkDown. $2" and hit Save button in the bottom.
Anytime you wish to revert this change, select "Reset Built-in Trap Definitions" under Manage Traps, select the trap you wish to revert from the grid and then hit Revert Traps button in the bottom.
Hope this helps!