Unsolved
This post is more than 5 years old
1 Rookie
•
90 Posts
0
15307
September 21st, 2015 09:00
OME 2.1 doesn't retain filter
Hello,
I just found this annoying bug in OME 2.1: go to Manage / System Update, chose a filter. Then move to any other tab and go back: filter is gone. That was not the case with the previous version. Really annoying when you have 4000+ devices and you go around the different tabs. Especially when the filter doesn't update the display in some case (another bug too).
Regards,
JP
No Events found!
DELL-Vijay B
183 Posts
0
September 21st, 2015 14:00
Hello JP,
Thanks for your post.
From the details looks like you are applying the filter on Non-Compliant Systems - Tab. Is that correct?
Tried the scenario mentioned with few non-compliant systems and were unable to see any deviation in the behavior with previous OME version.
Please raise a trouble ticket with support team on 800-945-3355![]( "Call: 800-945-3355")
so that they can take a closer look.
Thanks,
Vijay
DELL-Pupul M
2 Intern
•
1K Posts
0
September 22nd, 2015 07:00
Hi JP,
We have figured out that there is a problem with OME 2.1. The only work around that i can think of right now is every time you navigate to the page, you will need to select the filter again. Selecting the filter should correctly show the compliance report for the devices selected for that filter.
Hopefully, you will not need to come to this page multiple times. We are looking to see if there is any other possible work around.
The teams have worked on it and this will be fixed in future release.
e-JP
1 Rookie
•
90 Posts
0
September 22nd, 2015 10:00
Hi,
Thank you for the follow up.
JP