Unsolved
This post is more than 5 years old
2 Posts
0
20801
September 11th, 2015 08:00
Multiple IDRAC Cards Showing as One
Hi,
I have multiple IDRAC cards configured across our network. When discovering these in Open Manage Essentials it just shows the device name as IDRAC 8 which means all the server's in OME show as the same server under each discovery range I have created for each of the DRAC cards, and not the actual host-name i have assigned to each DRAC card. There is one DRAC card that is on the network that is showing with the correct host name I have compared all the settings and cant see any differences. If you could please advise?
No Events found!
DELL-Shivendra K
2 Intern
•
685 Posts
0
September 11th, 2015 10:00
Hi, thanks for the query.
After assigning unique host name to the iDRAC, try to perform soft reset and see if that helps. You can use "racadm racreset soft" command from a remote server as well to do so.
Hope this helps!
DELL-Pupul M
2 Intern
•
1K Posts
0
September 14th, 2015 00:00
Alternatively, OME 2.1 supports showing different servers with same name separately in the device tree. They do not get merged under the same name. You can hold on for the release which is going to happen very soon.
There is one more solution if you do not want to upgrade to OME 2.1
Read me section issue no. 44 should help you address it in OME 2.0.1
A_SEV
2 Posts
0
September 14th, 2015 02:00
Hi,
Many thanks for your response, could you please advise where I can locate section issue no. 44?
DELL-Pupul M
2 Intern
•
1K Posts
0
September 14th, 2015 03:00
After installing OME, there is a Read Me that gets created in the installed folder. You can find details in that Read Me.