Can someone provide the IDRAC 9 RACADM commands to set the IDRAC NIC Auto negotiation Set to On
These commands below do not work for IDRAC 9.
/admin1-> racadm getconfig -g cfgNetTuningcfgNetTuningNic100MB=2cfgNetTuningNicFullDuplex=1cfgNetTuningNicMtu=1500cfgNetTuningNicAutoneg=1/admin1-> racadm config -g cfgNetTuning -o cfgNetTuningNicAutoneg 0Object value modified successfully/admin1-> racadm racresetRAC reset operation initiated successfully. It may take a fewminutes for the RAC to come online again.
DELL-Rey G
3 Apprentice
•
1.1K Posts
0
May 28th, 2025 17:34
It should already be set to auto, but you can confirm with this command:
get iDRAC.Nic
in case its not:
>set iDRAC.NiC.Autoneg 1
[Key=iDRAC.Embedded.1#NIC.1]
Object value modified successfully
racadm>>
Rey
#Iwork4Dell
(edited)