Unsolved
This post is more than 5 years old
3 Posts
0
2722
June 15th, 2017 05:00
iDRAC 6 keeps showing as unknown in OME
Hey guys,
I have a Win 2008 r2 server with a idrac 6 version 2.85 which I upgraded to see if an update would help but no. I also tried deleting the server in OME and discovering it again which also didn´t work. I checked if the port I use is blocked by telnet to the server with the port and I could telnet it without any problem.
So here is my question what can i try more to get this server to be discovered and give me all the information because it only shows she idrac information a.t.m.
Thanks,
Jeroen
No Events found!
DELL-Vijay B
183 Posts
0
June 15th, 2017 12:00
Hi Jeroen,
You can try running ws-man test with Trouble shooting tool for the given iDRAC 6 and confirm back the results, so that we can have more insights into the problem you are facing?
Thanks,
Vijay.
Jburggraaf
3 Posts
0
June 16th, 2017 01:00
here is the result when skip CA check is enabled
Using TLS 1.0 for SSL/TLS handshake.
TLS 1.0 Handshake successful.
Connected.
WSMAN profiles found on the remote device are:
1. OS Deployment
2. Software Inventory
3. Software Update
4. Job Control
5. LC Management
6. Persistent Storage
7. Simple NIC
8. Simple FC
9. BIOS and Boot Management
10. Simple RAID
11. Fan
12. Power Supply
13. iDRAC Card
14. Memory
15. CPU
16. System Info
17. PCI Device
18. Video
19. Base Server
20. Service Processor
21. SM CLP Admin Domain
22. Power State Management
23. Active Directory Client
24. Simple Identity Management
25. Role Based Authorization
26. Record Log
27. DHCP Client
28. DNS Client
29. Ethernet Port
30. IP Interface
31. Command Line Protocol Service
32. Physical Asset
33. Base Metrics
34. Virtual Media
35. USB Redirection
36. Power Utilization
37. SMASH Collections
I myself don´t see a problem with the result and am clueless at the moment i just gave to iDRAC a hard reset and it still doesnt want to work.
DELL-Shivendra K
2 Intern
•
685 Posts
1
June 20th, 2017 06:00
Thanks for the information.
Try enabling CSIOR in the LifeCycle Controller options and see if it helps.
Jburggraaf
3 Posts
0
July 5th, 2017 06:00
Thanks for the help,
My other question is that in the device tree I have two default unknown groups and I want to delete one group but ofcourse I can´t delete default groups any suggestions.
Thanks,
Jeroen