Unsolved
This post is more than 5 years old
1 Message
0
2455
June 17th, 2016 06:00
HP servers are not getting added into OME
Hi
I have deployed this product in one of the environment where I have both Dell and HP servers. Using the discovery most of the servers were added including HP servers except for 2-3 HP servers. Not able to understand the reason behind this. Ideally as per the product it should be able add third party products as well which it did but why is it unable to add only 2 specific HP servers. What can be done to fix this and make sure I have all the servers managed from OME.
All the servers have ESXi installed on them. When I try to add one of the missing server in OME using Ip it shows the server which is already added and the Ip of that server is not the same
No Events found!
Geek_Mika
5 Practitioner
•
107 Posts
0
June 22nd, 2016 06:00
Hello,
In your case, I suggest to import MIB through MIB Import tools in order to detect your Server.
You can find few ressources on documentations TAB.
DELL-Shivendra K
2 Intern
•
685 Posts
0
June 23rd, 2016 06:00
Hi, thanks for the query.
Monitoring of non-Dell hardware is not supported in OME. Hardware inventory details and health cannot be recorded. However, you can enable receipt of formatted traps from such targets by importing respective MIBs into OME using MIB Import utility.
Hope this helps!