Unsolved
This post is more than 5 years old
2 Posts
0
28839
July 17th, 2015 10:00
Health status suddenly a question mark
I have some iDRAC 6 devices that have suddenly changed to a question mark status in the OME console, these were previously working absolutely fine up until this week., discovery is only WSMAN.
OME version is 2.0.1.2222
I can login to the DRAC fine with the same details that OME is using.
WSMAN troubleshooting with the troubleshooting tool returns ok.
I have run the following command which produces an almost empty output:
winrm enumerate "cimv2/root/dcim/DCIM_SystemView" -r:https://1.2.3.4/wsman -u:user -p:password -SkipCNcheck -SkipCAcheck -encoding:utf-8 -a:basic -format:pretty
output:
schemas.dmtf.org/.../results">
The same command produces expected output on a working box running the same version of iDRAC firmware eg: AssetTag, BIOSRealseDate etc...
This post seems to identify an almost identical situation: http://en.community.dell.com/techcenter/systems-management/f/4494/t/19495413
I am rather stuck on this.
DELL-Rob C
3 Apprentice
•
2.8K Posts
0
July 17th, 2015 14:00
Hi and thanks for the post and details.
Can you confirm that you have the latest f/w on those iDRACS? In the past, updating to the latest has helped with similar problems.
Thanks!
Rob
delltechcenter.com/ome
undernocircumst
2 Posts
0
July 21st, 2015 04:00
They don't have the latest version, I guess this is the next step, it's strange though as I have other servers running the same firmware that aren't broken.