Storage SNMP v3

Timetravellingelf,

While SNMP v3 is supported for alerts and monitoring, but is not supported for discovery. What you could do is configure it to SNMP v2 for discovery, then change to SNMP v3 for monitoring. 

Let me know if this helps.

where can i change the options for that?

You can find the steps on page 94 here. 

@DELL-Chris H ​ thanks, i dont see where you can change the SNMP once its been discovered however?

Hello,

you can see it at the same documentation page 72

Marco

@DELL-Marco B​ would it be this section?  'Manage incoming alerts' which is on page 74? as the other sees to be related to forwarding, as I use another system for monitring devices, that is what is using the SNMP currently, would it be a case if passing through the traffic through OME?

after checking with the team actually you cannot change after discovery, so SNMP v3 it is not supported even with only monitoring.

@DELL-Marco B​ is this something that can/will be implemented at one point? as the storage series we have doesnt support all versions of snmp to function simultaneously

Ok, just to clear stuff up. You can discover with SNMP v1 or 2, but SNMP v3 is only supported for monitoring. Now as far as changing the SNMP level after discovery, you would just need to copy/paste their range/devices out of one into another.