Unsolved
This post is more than 5 years old
1 Message
0
877
November 21st, 2012 00:00
MDS-9124 switch discovery in DPA
Hello ,
I have recently configured DPA at a customer location & have discovered VNX/RP . I need to discover cisco MDS-9124 switches as well. Pls help me with relevant details for the same.
No Events found!
Gpxr
9 Posts
0
January 16th, 2013 02:00
Hello,
For configuring a switch, you only need to have a SNMP (V2 at least) open like "public" in the Switch.
If the Switch Discovery is grayed into the Data Collection Wizard, you may need a Backup Client license in order to activate it.
Otherwise, discovering a switch (FC or IP) is one of the most easy part of DPA.
You will find all the details into the "DPA Configuration Guide" under Powerlink.
I hope that it will help and answer to your question.
BR,
Chris