Unsolved
10 Posts
0
835
January 31st, 2020 06:00
Unable to access management port
I added some lacp trunk ports to our core HP switch and for some reason this knocked out our mgmt port(s) on the DD. The iSCSI ports are fine, different VLAN. The mgmt port was running multipath out of the first two eth ports on the DD. I've confirmed that lacp is configured properly on the two ports on the switch with the correct Trk# and in the correct VLAN. I can console into the DD with a serial cable and the 2 ports using multipath are up and have the correct IP.
Any thoughts? Do I need to restart the DD? Can I reset the multipath through the console?
No Events found!
BenRadHMX
10 Posts
0
January 31st, 2020 11:00
Support broke the multipath link for me on the DD side and I was able to get back in.
Joan11s
1 Message
0
March 11th, 2020 05:00
If you can access the service assistant using the service address or the technician port of a node canister.