Unsolved
This post is more than 5 years old
3 Novice
•
234 Posts
•
841 Points
0
480
April 25th, 2017 06:00
DD2500 phantom fault light
Hi everyone
I have a pair of DD2500 units in my lab right now, they're identical except for the fact that one has a fault light on, the other does not (it's blue instead). They both show nothing for current alerts (#alerts show current), and I have no idea why I'd have a fault light on with no current alerts. Both are redundantly powered, all disks are installed and working (just 12 disks in the head unit for each) NVRAM modules are fully charged, etc. Any ideas what's happening here? It's on DDOS 5.4
No Events found!
Mtexter
3 Novice
•
234 Posts
•
841 Points
0
April 25th, 2017 11:00
I switched NVRAM modules, the 10GB SLIC cards, switched the whole suitcase/controller (or whatever you call it) between the two chassis, the error followed the controller, but no individual components. I even tried swapping memory. Still nothing showing under current alerts. At this point I'll try reloading the DDOS image from scratch and see if that helps.