Unsolved
This post is more than 5 years old
5 Posts
0
1124
August 15th, 2013 13:00
Zoning
Hello
we have 3 esx host with 6 HBA and only one switch in the new project and 8Gbs 8 FC ports for vnx 5300. I need to zone this storage to the three host . how can i do that . please give me some suggestions and steps to do the zoning .
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
August 15th, 2013 13:00
please move your question to Infrastructure forum on ECN
DGraci
3 Apprentice
•
408 Posts
0
August 16th, 2013 05:00
Hello - we are moving your post to the Infrastructure forum to better address your question.
Roger_Wu
4 Operator
•
4K Posts
1
August 19th, 2013 23:00
You should follow the "single initiator zoning" rule: Best practices for single initiator zoning
For the steps to do the zoning, you can refer to the Cisco online document:
Cisco MDS 9000 Family CLI Quick Configuration Guide - Configuring Zones and Zone Sets [Cisco MDS 9000 NX-OS and SAN-OS …
or Brocade admin guide:
http://www.brocade.com/downloads/documents/product_manuals/B_SAN/FOS_AdminGd_v710.pdf
dynamox
9 Legend
•
20.4K Posts
0
August 20th, 2013 04:00
brand of switch and code version ? You don't have to use single initiator/ single target approach because of some additional functionality (smart zoning) offered by some vendors.