This post is more than 5 years old
2 Intern
•
614 Posts
0
1151
July 18th, 2012 09:00
Replacing Nexus cards - ISCSI VNX 5700 question
Hi,
Our network team is going to replace two line cards in our NEXUS that connect to our VNX ISCSI slics. The development ISCSI cluster is on this platform. Is there anything I need to do to the ISCSI ports on my end before they start? Is there anything the application team needs to do for the ISCSI guests?
Thank you!
Admingirl
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
July 18th, 2012 11:00
ok, as long as your hyper-v hosts are configured with PowerPath (licensed) and they replace one line card at a time, PowerPath should handle the failover/failback just like it would with fiber channel connectivity.
admingirl
2 Intern
•
614 Posts
0
July 18th, 2012 10:00
Thank you Dynamox!
I spoke to the Windows Engineers. The cluster is running hyper-v and the hosts in the cluster are running powerpath. The vm guests running on the hosts do not.
dynamox
9 Legend
•
20.4K Posts
1
July 18th, 2012 10:00
how do your hosts connect to VNX ? Are they running PowerPath ?
admingirl
2 Intern
•
614 Posts
0
July 18th, 2012 11:00
Great! Thank you Dynamox!