This post is more than 5 years old
46 Posts
0
639
February 24th, 2010 04:00
Performance manager will not start after upgrade to 4.2(3)
We were running 4.1(a) and have now done this upgrade in preparation for loading the new code level onto the switches.
Now we cannot get Performance Manager to start. After starting the FM service, in the web gui I see the PM service status as stopped. Clicking start the status changes to starting but stays at starting
.
In the PM log we see this message multiple times:
2010.02.24 14:28:32 INFO [PM] waiting while fabric FS02 is being discovered - every 20 seconds or so. In this example FS02 is the first fabric it is trying to discover.
Prior to the upgrade I can confirm that this was working correctly. I have opened a ticket with EMC but would like to know if anyone has seen this before.
healyj
141 Posts
0
November 28th, 2017 23:00
Hi there,
In our efforts to clean up the forum, we came across your question / statement.
If the question / statement is still valid, not expired and you need an update please reach out again and we try to get it answered.
As for now we set it to “answered.”
Regards,
Jim
dynamox
9 Legend
•
20.4K Posts
0
February 24th, 2010 06:00
ConnectrixHelpe
259 Posts
0
February 24th, 2010 08:00
Hello,
Which licenses do you have on the switches you are trying to discover?
Thank you.