This post is more than 5 years old
7 Posts
0
1004
December 14th, 2011 08:00
MDS9500 gen3 module - max. interfaces in port-channel?
Hi,
Just trying to establish the maximum no. of interfaces (ISL's) we can configure into a port-channel using MDS9500 with gen3 modules and supervisor2 cards. Reading the docs there was a limit of x16 on gen2 (and possibly with some gen2/gen3 intermix), but wondering if this has been increased on the gen3 modules?One slight complication is that we do have a couple of MSM 18/4 modules in the chassis too, which I believe are classed as gen2 - however none of the ISL's we're planning for the port-channel would come from this card.
Code level 4.2(3) at present.
Any help in answering, much appreciated?
Cheers
No Events found!
healyj
141 Posts
0
December 12th, 2017 07:00
Hi there,
In our efforts to clean up the forum, we came across your question / statement.
If the question / statement is still valid, not expired and you need an update please reach out again and we try to get it answered.
As for now we will set it to “answered.”
Regards,
Jim