Unsolved
This post is more than 5 years old
152 Posts
0
795
May 7th, 2010 07:00
LSAN Zones
Before i can start the SAN Copy session we need to create LSAN zones. One of our team member created the lsan zones in the below way.
Source CHA-A
Zone Name :lsan_Cla_3658_spa0_spb0_Cla_0568_spa0_spb0
50:06:01:60:39:a0:2a:15 EXIST
50:06:01:68:39:a0:2a:15 EXIST
50:06:01:60:39:a0:10:d5 Configured
50:06:01:68:39:a0:10:d5 Configured
CHA -B
Zone Name :lsan_Cla_3658_spa1_spb1_Cla_0568_spa1_sp1
50:06:01:61:39:a0:2a:15 EXIST
50:06:01:69:39:a0:2a:15 EXIST
50:06:01:61:39:a0:10:d5 Configured
50:06:01:69:39:a0:10:d5 Configured
On the Target side also the LSAN Zones were created in the same way. What i observed is the lsan zone information on the source Brocade Router side was propagated to Broaced fabric on the source side but the LSAN Zone info on the target Brocade Router side is not propagated into the target Brocade fabric. Becuase of this i was not able to establish a SAN copy session between two clariion arrays. Can anyone please tell me if the LSAN Zones are configured properly or not.
Brocade Router - 7500
Ali_Kaunain
11 Posts
0
July 6th, 2010 03:00
Hi Vimad,
Its probably too late to reply, but, I didnt see any replies to your post. So, here are a few questions before we troubleshoot any further.
Could you check up on a few things:
1. If the ISL is enabled between the Target router and the switch.
2. Please paste the output of cfgshow from both the switches in the fabrics.
3. Please look for any difference betweeh the licenses installed on the switches in both the fabrics.
Thank you,
Ali
andreas.scht
2 Intern
•
219 Posts
0
July 6th, 2010 07:00
Ich bin bis 12.07.2010 abwesend.
Ich werde Ihre Nachricht nach meiner Rückkehr beantworten.
In dringenden Fällen bitte ich Sie Kontakt mit meinem Herrn Dieter Potempa
(Düsseldorf) aufzunehmen.
Mit freundlichem Gruß
Andreas Schröer
Hinweis: Dies ist eine automatische Antwort auf Ihre Nachricht
"[Infrastructure Connectivity ] New message: "LSAN Zones"" gesendet am
06.07.2010 12:06:03.
Diese ist die einzige Benachrichtigung, die Sie empfangen werden, während
diese Person abwesend ist.