This post is more than 5 years old
2 Intern
•
227 Posts
0
1852
January 23rd, 2011 00:00
FCIP Encryption
Hi ,
Am trying to enable encryption on my SRDF replicatition, am using MSD 9222i any documentation/guides?
Regards,
No Events found!
This post is more than 5 years old
2 Intern
•
227 Posts
0
1852
January 23rd, 2011 00:00
Hi ,
Am trying to enable encryption on my SRDF replicatition, am using MSD 9222i any documentation/guides?
Regards,
Top
healyj
141 Posts
0
December 12th, 2017 07:00
Hi there,
In our efforts to clean up the forum, we came across your question / statement.
If the question / statement is still valid, not expired and you need an update please reach out again and we try to get it answered.
As for now we will set it to “answered.”
Regards,
Jim
dynamox
9 Legend
•
20.4K Posts
0
January 23rd, 2011 15:00
looks like you get to enable IPsec when you define source and target connections
http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/ipsvc/fm/ipsvc.html
Joe_Ab
2 Intern
•
227 Posts
0
February 7th, 2011 13:00
only on switch level ? no encryption on san director level ? seems i need enterprise license to do it on MDSs!
dynamox
9 Legend
•
20.4K Posts
0
February 7th, 2011 14:00
what do you mean ? SAN director is a switch.
Joe_Ab
2 Intern
•
227 Posts
0
February 7th, 2011 15:00
Correction, DMX - Fibre Channel directors .
dynamox
9 Legend
•
20.4K Posts
0
February 7th, 2011 18:00
no encryption in transit in DMX but there is now encryption at rest on VMAX (code 75).
Joe_Ab
2 Intern
•
227 Posts
0
February 7th, 2011 22:00
Ya, I checked that. Sounds like I have an old box ..
SKT2
2 Intern
•
1.3K Posts
0
February 13th, 2011 05:00
i was thinking Gig-E(RE) has default compression enabled.
Joe_Ab
2 Intern
•
227 Posts
0
February 13th, 2011 07:00
We are talking about encryption not compression..