Unsolved
1 Rookie
•
1 Message
0
105
August 8th, 2024 12:51
Errors on DELL N1548P switch
Hello everyone, I have problems with a DELL Powerconnect N1548P switch, this device works as an access switch, the errors it shows are:
Received sbus ack with SER_CHECK_FAIL set.
FP_TCAM.ipipe0 failed(ERR)
Can you guide me to know what this problem refers to?
The switch still has a valid warranty
No Events found!
DELL-Sam L
Moderator
•
7.6K Posts
0
August 9th, 2024 09:01
Hello PedroSilvaE,
What is your current firmware version on your N1548p? If you reboot the switch, are you still receiving the error?
Henk4
1 Rookie
•
9 Posts
0
September 2nd, 2024 17:57
It might be error with spelling mistake sertificate check fail so try searching certificate check fail, and report about it if it works.
DELL-Young E
Moderator
•
5.2K Posts
0
September 5th, 2024 04:31
Hello OP,
FP_TCAM.ipipe0 failed(ERR) >> CAM table got issues(MAC table).
Please reboot the switch and if switch firmware is lower, do upgrade to latest version and see if it's okay.
Respectfully,
(edited)