This post is more than 5 years old
1 Rookie
•
15 Posts
0
8216
May 19th, 2011 04:00
Connectrix FOS download
Hi All,
I need to upgrade our Connectrix FOS on 6 switches.
Try as I might, I cannot find it on PowerLink. I know the Connectrix is a Brocade, which is exactly the same type of switch as an HP StorageWorks SAN Switch (which we also have, and are phasing out).
Is it possible to use the Brocade FOS that I can download from there site? EMC hasn't gone and added a bit of code into the release to tweak anything>
Thanks,
Craig
No Events found!
avs
1 Rookie
•
91 Posts
0
May 20th, 2011 12:00
I can get it from EMC Service Partners Web Access. Ask your local EMC rep to get an access to PartnerWeb
dynamox
9 Legend
•
20.4K Posts
0
May 19th, 2011 04:00
Home > Support > Software Downloads and Licensing > Downloads C > Connectrix Firmware B Series
CraigV3
1 Rookie
•
15 Posts
0
May 19th, 2011 06:00
...I only have the following:
Connectrix Switches and Directors
Connectrix Manager
No way to download the firmware...
dynamox
9 Legend
•
20.4K Posts
0
May 19th, 2011 07:00
contact PowerLink support so they can modify your portal access. You want to make sure you use EMC supported verson for FOS, typically EMC approved version lags behind what's already out on HP/Brocade website.
dynamox
9 Legend
•
20.4K Posts
1
May 20th, 2011 12:00
regular customers will not get access to partner website. As long as you switch is registered with EMC, you should have access to the download section for FOS.
CraigV3
1 Rookie
•
15 Posts
0
May 27th, 2011 00:00
Hi,
Thanks all for the help. It was a combo of all of them, but I ended up switching to my partner status, and then was able to download the software. I am used to the ease at which you can get firmware off the HP site...getting used to Powerlink is taking some time
Thanks!
Craig