Skip to main content
Start a Conversation

This post is more than 5 years old

Solved!

Go to Solution

ArturC

16 Posts

690

November 4th, 2009 03:00

Brocade 4020 ISL

Hi All,

Can I define a ISL between two san blades 4020?

Thank you all!

dynamox

9 Legend

 • 

20.4K Posts

November 4th, 2009 03:00

i would think yes. I have 4024 that are ISL to other switches, they are running the same FOS code as other brocade switches so should work.

ConnectrixHelpe

259 Posts

November 4th, 2009 12:00

I would recommend checking the configuration and FOS levels on the switch to see if they are compatible. You should also check with whomever provides support on the blade switches to ensure the configuration is supported. The EMC Support Matrix will list what is support in an EMC environment.

Thank you.

Was this post helpful?

View All

No Events found!

Top