Unsolved
This post is more than 5 years old
1 Rookie
•
31 Posts
0
1489
September 14th, 2019 12:00
SCv3020 FC issue
Hi
SCv3020 with two controllers.
Each controller has 2 ports FC 16gb.
Two Brocade 300.Connected as described on best practices. https://topics-cdn.dell.com/pdf/storage-scv3000_deployment-guide_en-us.pdf
ESXI sees only 2 paths (Active IO)
Why do I not see 4? (2 should be StandBy, doesn't it?
No Events found!
DELL-Sam L
Moderator
•
7.6K Posts
0
September 16th, 2019 13:00
Hello chenchen,
What you are seeing is correct. Since you your using FC you will only see the active paths in VMware. If you were using iSCSI then you would see all 4 paths in VMware.
Please let us know if you have any other questions.
chenchen
1 Rookie
•
31 Posts
0
September 21st, 2019 15:00
Ok
Thanks for the answer.
So actually in both of them (FC or ISCSI) - no matter what i see - 2 paths are active, right?
there is no difference, am i right?
DELL-Sam L
Moderator
•
7.6K Posts
0
October 1st, 2019 08:00
Hello chenchen,
That is correct only 2 paths will show as active.
Please let us know if you have any other questions.